Welcome To The PSI Blog

Blog Archive for: 10 2009

by Kyle Tomita on Fri, Oct 30th, 2009 | Client Vehicles, Performance Products, Tuning

Hondata Flashpro

For the past six years, Jason Oefelein has been using Hondata products.  Portland Speed Industries has picked up a FlashPro unit for use with 06+ US Honda Civic Si, 06+ US Honda S2000 (soon to be released) and 06+ Japanese and European Honda Civic Type R.  PSI highly recommends the FlashPro because of its functionality and value.  The FlashPro allows for the tuning and datalogging of your late model  DBW  (drive by wire) S2000 or  Civic.

by Kyle Tomita on Wed, Oct 28th, 2009 | Client Vehicles, General, John Reed Racing

Twin-Turbo Lamborghini Gallardo in front of PSI 1

The World's Fastest Lamborghini has returned to the west coast and stopped by Portland Speed Industries.  After having a twin turbo setup installed by Underground Racing.  The tuning was handled by John Reed of John Reed Racing.

by Kyle Tomita on Tue, Oct 20th, 2009 | Client Vehicles, Events and Shows, Motorsports, Tuning

prerace meeting

This past Saturday, October 17, there was a 12 Hour Endurance Race at Portland International Raceway.  Northwest Autosports and Portland Speed Industries brought out the Norma Project.

by Kyle Tomita on Tue, Oct 20th, 2009 | Events and Shows, On The Dyno

This past Saturday, October 17, Portland Speed Industries hosted S2Ki Oregon for a dyno day. Although it was raining heavily that day, there was around twenty S2000's that showed up. Some came to see what their car could put down, while others came for support and to check out PSI.

by Kyle Tomita on Sat, Oct 3rd, 2009 | Client Vehicles, On The Dyno, Tuning

Camaro on dyno wide angle

A client brought in his Camaro to have Portland Speed Industries unlock its full potential.  The Camaro is a first generation model with a 502 cubic inch engine with a BDS 8-71 blower.

- Page 1 of 1 -
5 Blog Entries